Email:beckylee@jmdredger.com TEL:+86 15095103151
DETAILS SPECIFICATIONS OF JMD350 14INCH CUTTER SUCTION DREDGER
DIMENSIONS |
|
SPUDS |
|
Length over pontoons |
18m |
Length |
11.5m |
Breadth |
5.20m |
Diameter |
325mm |
Depth |
1.5m |
Weight |
1800kg |
Mean draught with full bunkers |
0.9m |
SPUD HOISTING CYLINDERS |
|
Maximum standard dredging depth |
8m |
Force |
100kN |
Suction pipe diameter |
350mm |
Spud stroke (each time) |
2.5m |
Discharge pipe diameter |
350mm |
Deck Crane |
|
Total installed power |
363KW |
Lifting power |
15KN |
SWING WIDTH WITH 35° SWING EACH SIDE |
Outreach |
2.5m |
|
At maximum dredging depth |
16m |
Other Features |
|
At minimum dredging depth |
19m |
1\ standard design, allowing for short delivery times and competitive pricing |
|
DREDGE PUMP |
|
2\spare parts available from stock |
|
Type |
12/10G-H |
3\fresh-water engine cooling system |
|
Engine type (Cummins) |
KTA19-M |
4\fresh-water engine cooling system |
|
Engine power |
351KW @1,800rpm |
5\completely assembled and fully tested afloat before delivery |
|
Total oil consumption |
65L/H |
6\dredge pump driven through integrated bearing block, clutch |
|
ELECTRICAL INSTALLATION |
|
and reduction gearbox easy and fast assembly and dismantling |
|
Voltage |
24V DC |
7\ready for operation on arrival at site |
|
Battery capacity |
400Ah |
8\hydraulic ram for ladder hoisting |
|
Voltage (50Hz) |
230/400V AC |
9\special tools are supplied for connecting and disconnecting pontoons and |
|
Power (50Hz) |
12KW |
the cutter ladder, and for maintenance of the dredge pump and diesel engine |
|
CUTTER |
|
10\wide range of services and optional equipment available |
|
Type |
JD60 |
(including work boats, boosters and pipelines) |
|
Power at shaft |
60KW |
Optional extra’s |
|
Diameter |
1100mm |
Swing Angle Measurement |
|
Maximum speed, approx. |
30rpm |
air conditioning |
|
LADDER AND SWING WINCHES |
|
generator set |
|
Line pull, first layer |
40kN |
increased discharge pipeline diameter |
|
Maximum line speed |
22m/min |
increased dredging depth |
|
Wire diameter |
16mm |
life-cycle support packages (including training, technical support, etc.) |
|
Drum diameter |
325mm |
optional packages: HSE (health, safety and environment) and nautical |
|
Swing wires length |
100m |
|
|
Anchor weight |
200kg |
|
|